Servo Stall Currents PDF Print E-mail
Written by Evan Hollins   
Tuesday, 30 September 2014 17:23

A big rule change this year added the ability to use as big of a servo as possible while still staying under 5 amps per servo controller at stall. Unfortunately, many of the servos we commonly use didn't have documented stall currents. To find these, we contacted ServoCity™ and asked them what to do. They were able to talk to HiTec© and retrieve stall currents for many of the servos that they make. Here they are in a table shown below. 

We would like to thank ServoCity and HiTec for helping not just us but all of FTC! 

For Analog Servos:

SERVO

 

STALL CURRENT @ 4.8V

STALL CURRENT @ 6V

    

HS-35

 

360mA

430mA

HS-40

 

460mA

580mA

HS-45

 

440mA

 

HS-53

 

440mA

550mA

HS-55

 

440mA

550mA

HS-65

 

960mA

1200mA

HS-70

 

960mA

1250mA

HS-81/82

 

1450mA

1800mA

HS-311

 

700mA

800mA

HS-322

 

700mA

800mA

HS-485

 

1000mA

1200mA

HS-625

 

1600mA

2000mA

HS-645

 

1600mA

2000mA

HS-755

 

1500mA

1800mA

HS-765

 

1500mA

1800mA

HS-785

 

1500mA

1800mA

HS-805

 

4800mA

6000mA

HS-1425CR

 

640mA

800mA

 

 For Digital Servos: 

SERVO

 

STALL CURRENT @ 4.8V

STALL CURRENT @ 6V

HS-5035

 

360mA

430mA

HS-5055

 

500mA

700mA

HS-5065

 

960mA

1200mA

HS-5070

 

1000mA

1300mA

HS-5085

 

1700mA

2150mA

HS-5087

  

1450mA

HS-5485

 

1000mA

1200mA

HS-5495/96

 

1200mA

1400mA

HS-5565

  

2100mA

HS-5585

  

2100mA

HS-5625/45

  

2100mA

HS-5665/85

  

2100mA

HS-7235/45

  

1300mA

Attachments:
Download this file (2013_HRU_ServoMat_2.pdf)HiTec Servo Product Table[ ]3531 Kb01/10/14 07:22
Last Updated on Tuesday, 30 September 2014 21:29
 
Copyright © 2017 cougarrobot.com. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.